The equivalence of moisture and temperature in physical aging of polymeric compositesHU, H; SUN, C. T.Journal of composite materials. 2003, Vol 37, Num 10, pp 913-928, issn 0021-9983, 16 p.Article

Durability and integrity studies of environmentally conditioned interfaces in fibrous polymeric composites: Critical concepts and commentsBANKIM CHANDRA RAY; RATHORE, Dinesh.Advances in colloid and interface science (Print). 2014, Vol 209, pp 68-83, issn 0001-8686, 16 p.Article

Optimization of an industrial friction material formulationTANG, Choong-Fong; YAFEI LU.Tribology transactions. 2003, Vol 46, Num 1, pp 19-23, issn 1040-2004, 5 p.Conference Paper

ANALYSIS OF CURE REACTION KINETICS OF ARAMID/TOUGHENED-EPOXY PREPREG SYSTEM AIMING AT PROCESSING OF COMPOSITE MATERIAL FOR STRUCTURAL APPLICATIONSSOAHIB, A; ZHE MIAO; IRFAN, Y et al.Journal of polymer engineering. 2007, Vol 27, Num 8, pp 565-582, issn 0334-6447, 18 p.Article

An investigation into the long-term viscoelastic recovery of Nylon 6,6 fibres through accelerated ageingPANG, Jody W. C; FANCEY, Kevin S.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2006, Vol 431, Num 1-2, pp 100-105, issn 0921-5093, 6 p.Article

Dynamic encapsulation of hydrophilic nisin in hydrophobic poly (lactic acid) particles with controlled morphology by a single emulsion processSHAOWEN JI; JUE LU; ZHIGUO LIU et al.Journal of colloid and interface science. 2014, Num 423, pp 85-93, issn 0021-9797, 9 p.Article

A novel magneto-fluorescent microsphere: Preparation and characterization of polystyrene-supported Fe₃O₄ and CdS nanoparticlesKABOUDIN, Babak; GHADERIAN, Abolfazl.Applied surface science. 2013, Vol 282, pp 396-399, issn 0169-4332, 4 p.Article

Study of the effect of particle size on the effective modulus of polymeric composites on the basis of the molecular chain network microstructureYUNPENG JIANG; TOHGO, Keiichiro; HUI YANG et al.Computational materials science. 2010, Vol 49, Num 2, pp 439-443, issn 0927-0256, 5 p.Article

Structural and microwave dielectric properties of ferroelectric poly(vinylidene difluoride)―polyaniline composite thin filmsDEROUICHE, H; MOHAMED, A. B.Thin solid films. 2012, Vol 526, pp 274-277, issn 0040-6090, 4 p.Article

Sur l'usinabilité des composites à matrices polymères renforcée par des fibres = On machinability of fiber reinforced polymeric compositesMATA CABRERA, Francisco; HANAFI, Issam; KHAMLICHI, Abdellatif et al.Mécanique & industries. 2010, Vol 11, Num 2, pp 93-103, issn 1296-2139, 11 p.Article

Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powderMARINHO, Bernardo; GHISLANDI, Marcos; TKALYA, Evgeniy et al.Powder technology. 2012, Vol 221, pp 351-358, issn 0032-5910, 8 p.Article

The strain-sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene conductive composites prepared by the vacuum-assisted hot compressionYINGYING QU; KUN DAI; JUNHUI ZHAO et al.Colloid and polymer science (Print). 2014, Vol 292, Num 4, pp 945-951, issn 0303-402X, 7 p.Article

THERMOMECHANICAL CHARACTERIZATION OF POLIMERIC IONIC CONDUCTOR MEMBRANES BASED ON PVOH-H₃PO₂-ZrO₂BEDOYA, F; VARGAS, R. A.Journal of Nanostructured Polymers and Nanocomposites. 2013, Vol 9, Num 1, pp 5-11, issn 1790-4439, 7 p.Article

On the mechanical response of randomly reinforced chopped-fibers composites : Data and modelIONITA, A; WEITSMAN, Y. J.Composites science and technology. 2006, Vol 66, Num 14, pp 2566-2579, issn 0266-3538, 14 p.Article

Strength of hygrothermally conditioned polymer composites with voidsLEALI COSTA, Michelle; CERQUEIRA REZENDE, Mirabel; DE ALMEIDA, Sérgio Frascino M et al.Journal of composite materials. 2005, Vol 39, Num 21, pp 1943-1960, issn 0021-9983, 18 p.Article

Strain rate effect on in-plane shear strength of unidirectional polymeric compositesTSAI, Jia-Lin; SUN, C. T.Composites science and technology. 2005, Vol 65, Num 13, pp 1941-1947, issn 0266-3538, 7 p.Article

A novel electro-thermal anti-icing system for fiber-reinforced polymer composite airfoilsMOHSENI, M; AMIRFAZLI, A.Cold regions science and technology. 2013, Vol 87, pp 47-58, issn 0165-232X, 12 p.Article

CONDUCTIVITE THERMIQUE DES COMPOSITIONS DE POLYMERESOLEJNIKOV VN; DUSHCHENKO VP; ROMUSIK VV et al.1974; TEPLOFIZ. I TEPLOTEKH., U.S.S.R.; S.S.S.R.; DA. 1974; NO 28; PP. 69-70; BIBL. 4 REF.Article

Licuri fibers: alternative reinforcement to polymeric compositesLEAO, M. A; AQUINO, E. M. F; TINO, S. R. L et al.Journal of reinforced plastics and composites. 2011, Vol 30, Num 6, pp 516-523, issn 0731-6844, 8 p.Article

Polyester composite based on betelnut fibre for tribological applicationsYOUSIF, B. F; LAU, Saijod T. W; MCWILLIAM, S et al.Tribology international. 2010, Vol 43, Num 1-2, pp 503-511, issn 0301-679X, 9 p.Article

Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: A critical discussion of wear mechanismsLI CHANG; FRIEDRICH, Klaus.Tribology international. 2010, Vol 43, Num 12, pp 2355-2364, issn 0301-679X, 10 p.Article

Randomly reinforced composites: properties, failure and aspects of material designIONITA, A; WEITSMAN, Y. J.Probabilistic engineering mechanics. 2006, Vol 21, Num 1, pp 64-72, issn 0266-8920, 9 p.Article

A PMMA composite as an optical diffuser in a liquid crystal display backlighting unit (BLU)KIM, Geunhyung.European polymer journal. 2005, Vol 41, Num 8, pp 1729-1737, issn 0014-3057, 9 p.Article

Rheological, thermal, and mechanical characterizations of polystyrene/single-walled carbon nanotube compositesYEHAI YAN; JINFANG ZHANG; JIAN CUI et al.Colloid and polymer science (Print). 2012, Vol 290, Num 13, pp 1293-1300, issn 0303-402X, 8 p.Article

Micelle-like nanoparticles of block copolymer poly(ethylene oxide)-block-poly(methacrylic acid) incorporating fluorescently substituted metallacarboranes designed as HIV protease inhibitor interaction probesUCHMAN, Mariusz; CIGLER, Petr; GRÜNER, Bohumir et al.Journal of colloid and interface science. 2010, Vol 348, Num 1, pp 129-136, issn 0021-9797, 8 p.Article